What to do if Edwards Water Pump shows warning 1.01 Power interrupt?
If your Edwards Water Pump displays a 'Warning 1.01 Power interrupt', it indicates that the electrical supply to the pump experienced a brownout lasting longer than 1 second. You should check the electrical supply to resolve this issue.
What to do if Edwards iXL120 displays warning 152.01 Valve Not Shut?
If the Edwards Water Pump shows a 'Warning 152.01 Valve Not Shut', it means the foreline gate valve hasn't closed properly. Check the wiring and air supply to the gate valve. Keep in mind that this warning will only disappear once the valve has been successfully opened and closed.
What to do if Edwards iXL120 displays warning 71.13 AC Sup Missing?
If the Edwards Water Pump displays a 'Warning 71.13 AC Sup Missing', it means the pump controller can't communicate with the accessory module. Verify that the accessory module is correctly connected to the pump, and then cycle the power to the pump.
How to fix Edwards Water Pump warning 55.13 Sensor missing?
If your Edwards Water Pump is showing 'Warning 55.13 Sensor missing', the dry pump temperature sensor may be disconnected or faulty. Verify that the sensor is properly fitted and correctly connected.
What to do if Edwards iXL120 shows a power interrupt warning?
If your Edwards Water Pump displays a 'Power interrupt' warning, it indicates that the electrical supply to the pump experienced a brownout lasting longer than 1 second. You should check the electrical supply to resolve this issue.
What to do if Edwards iXL120 Water Pump displays AC Sup Missing warning?
If the Edwards Water Pump displays an 'AC Sup Missing' warning, it means the pump controller can't communicate with the accessory module. First, ensure the accessory module is correctly connected to the pump. Then, cycle the power to the pump. If the warning continues, contact Edwards.
How to fix Edwards iXL120 Water Pump 'Sensor missing' warning?
If you're seeing a 'Sensor missing' warning on your Edwards Water Pump, the dry pump temperature sensor might be disconnected or faulty. Verify that the sensor is properly fitted and correctly connected.
What to do if Edwards iXL120 Water Pump shows 'Valve Not Shut' warning?
If your Edwards Water Pump displays a 'Valve Not Shut' warning, it indicates that the foreline gate valve has failed to close. Check the wiring and air supply to the gate valve. Note that this warning will only disappear once the valve has been successfully opened and closed.
What to do if Edwards Water Pump shows 'Valve Not Open' warning?
If your Edwards Water Pump displays a 'Valve Not Open' warning, it indicates that the foreline gate valve has failed to open. Check the wiring and air supply to the gate valve. Note that this warning will only disappear once the valve has been successfully closed and opened.
What causes 'No DP Inv Comms' warning on Edwards iXL120, and how to fix it?
The 'No DP Inv Comms' warning on your Edwards Water Pump means the pump controller can't communicate with the dry pump inverter. Check the wiring between the pump controller and the dry pump inverter.
General| Brand | Edwards |
|---|---|
| Model | iXL120 |
| Category | Water Pump |
| Language | English |
Defines manual's purpose, intended applications, and system components.
Explains control hierarchy between panel, PDT, and tool.
Covers dimensions, mass, noise, and performance metrics.
Details weight distribution and electrical ratings.
Covers electrical, cooling water, and nitrogen supply specifications.
Essential safety guidelines and unpacking instructions.
Procedures for locating, connecting to vacuum/exhaust.
Covers electrical supply, controls, EMS, and water connections.
Steps for initial start-up and system verification.
Guides on system start-up, status indicators, and shutdown procedures.
Procedures for handling alarms, EMS, and restarting the pump.
Explains the Auto Tune process, requirements, configuration, and operation.
Outlines safety measures, maintenance intervals, and system relocation.
Covers draining water, inspecting components, and general upkeep.
Provides instructions for safely moving, storing, and disposing of the equipment.
Information on service options and ordering spare parts.
Lists and describes available accessories for the pump.
Introduces the PDT, its functions, and menu navigation.
Covers pump warnings, their causes, and LED indications.
Details PDT messages, alarms, and inverter fault interpretation.
Addresses communication issues and other fault conditions.
To Next Page
