EasyManua.ls Logo

Edwards iXL750Q User Manual

Edwards iXL750Q
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
M561-00-880
Issue C Original
Instruction Manual
iXH, iXL and pXH Dry Pumping Systems

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Edwards iXL750Q and is the answer not in the manual?

Edwards iXL750Q Specifications

General IconGeneral
BrandEdwards
ModeliXL750Q
CategoryWater Pump
LanguageEnglish

Summary

Introduction

Applications

Details the intended applications for iXH, iXL, and pXH pumping systems across industries.

Technical Data

General Technical Data

Presents physical and performance specifications for various pump models in tabular format.

Performance Data

Details the typical peak pumping speed, ultimate vacuum, and inlet pressure capabilities.

Electrical Data

Lists electrical characteristics, ratings, and cable requirements for pump models.

Cooling Water Data

Details specifications for the cooling water system, including pressure, temperature, and quality.

Installation

Locating the Dry Pumping System

Provides guidance on positioning the system, including lifting and levelling procedures.

Connecting to Vacuum/Exhaust System

Instructions for connecting the pump inlet and exhaust to vacuum and extraction systems.

Flammable/Pyrophoric Material Handling

Addresses risks and safety measures when pumping flammable or pyrophoric materials.

System Leak Testing

Instructions for performing leak tests to ensure system integrity and prevent hazardous substance release.

Electrical Supply Connection

Covers requirements for connecting the pump system to a safe and protected electrical supply.

Operation

System Start-up

Guides the user through the initial steps and safety checks before starting the pumping system.

Manual Shut-down

Covers procedures for shutting down the pump system manually using various methods.

Automatic Shut-down

Details how the system responds to alarm conditions and the 'Run 'til crash' mode.

Unplanned Shut-down and Alarms

Lists pump protection sensors and the conditions that trigger warnings and alarms.

Emergency Stop Operation

Explains how to use the emergency stop switch and its effect on system operation.

Restarting After Shutdown

Provides steps for safely restarting the pump after an emergency or automatic shutdown.

Maintenance

Safety and Maintenance Frequency

Outlines safety precautions and general guidelines for performing maintenance tasks.

Service, Spares, and Accessories

Appendix A1: Pump Display Terminal

Warning and Alarm Display

Describes how warnings and alarms are displayed, acknowledged, and cleared via the PDT.

Appendix A2: Troubleshooting

Warnings

Explains how warnings are indicated via LEDs and PDT messages, and their potential causes.

Alarms

Details how alarms are indicated via LEDs and PDT messages, and system shutdown behaviour.

Inverter Warnings and Alarms

Explains how to decode inverter warning and alarm codes displayed by the PDT.

Related product manuals