Edwards iXL600N User Manual

A540-55-880
Issue D
Instruction Manual
iXL600 and iXL1000 Dry Pump Systems
Description Item Number
iXL600 200-460 V 50/60 Hz A541-33-010
iXL600N 200-460 V 50/60 Hz A541-34-010
iXL1000 200-460 V 50/60 Hz A541-53-020
iXL1000N 200-460 V 50/60 Hz A541-54-020
Original Instructions

Edwards iXL600N Specifications

General

Brand	Edwards
Model	iXL600N
Category	Water Pump
Language	English

Summary

Technical Data

2.1 General technical data

Provides overall specifications and characteristics of the pump systems.

2.2 Performance data

Details the pumping speed, ultimate pressure, and operating zones.

2.5 Electrical data

Provides ratings, connections, and general electrical specifications.

2.6 Cooling water data

Details specifications for the cooling water system, including flow and pressure.

Installation

3.1 Locate the dry pumping system

Instructions for positioning and leveling the pump system.

3.3 Connect the dry pumping system to the vacuum/exhaust system

Procedure for connecting the pump inlet and exhaust to external systems.

3.5.1 Flammable/pyrophoric materials

Safety precautions when pumping flammable or pyrophoric materials.

3.7 Electrical supply

Requirements and precautions for electrical supply connection.

3.9 Connect to the emergency stop circuit

How to connect the pump to an emergency stop circuit.

3.10 Connect and set up the cooling water

3.12 Commission the system

Operation

4.1 Start-up

4.1.1 Front panel control operation

4.1.2 PDT operation

4.3 Manual shut-down

4.4 Automatic shut-down

4.6 Emergency stop

How to use the emergency stop function and its behavior.

Maintenance

5.1 Safety and maintenance frequency

5.2 Relocate the system for maintenance

Appendix A1: Pump Display Terminal

A1.2 Pump start / stop and control

A1.3 Warning / Alarm display and acknowledgement

Appendix A2: Troubleshooting

A2.1 Warnings

A2.2 Alarms

A2.3 Inverter warnings and alarms

A2.4.1 Pump controller communications