To Next PageTo Next Page
Need help?Do you have a question about the Edwards AIM-S-NW25 and is the answer not in the manual?
General| Model | AIM-S-NW25 |
|---|---|
| Connection Size | NW25 |
| Pressure Connection | NW25 Flange |
| Output Signal | 0 to 10 V DC (logarithmic) |
| Power Supply | 24 VDC |
Manual scope, definitions of WARNING and CAUTION instructions.
Details the AIM Gauge, its versions (S and SL), measurement range and connections.
Explains how gas type affects the AIM Gauge's output signal.
Provides physical specifications like mass, volume, and enclosure rating.
Specifies ambient temperature, humidity, and altitude limits.
Details electrical supply, output signals, connectors, and impedance.
Lists materials in contact with vacuum, like stainless steel and fluoroelastomer.
Instructions for checking the AIM Gauge for damage and handling packaging.
Guidance on mounting the AIM Gauge, recommending vertical installation.
Details how to connect the AIM Gauge to vacuum systems and power sources.
Instructions for connecting to Edwards control units or displays.
Guidance for connecting to independent power and control systems.
Crucial safety warnings regarding explosive gases, high voltages, and magnets.
Explains how to activate and deactivate the gauge based on system pressure.
Describes how to read pressure from the display or via voltmeter.
Details the error signal's purpose and when it is active.
Overview of internal components and general maintenance advice.
Step-by-step guide for replacing the AIM Gauge's body tube.
Instructions for replacing the electrode assembly within the gauge.
Procedure to replace the electronics and magnet housing unit.
Detailed steps for cleaning the gauge's internal parts.
Guides on troubleshooting common issues using the error signal.
Guidelines for storing the AIM Gauge in clean, dry conditions.
Information on safe disposal and recycling of the product.
Overview of where to obtain spare parts and accessories.
Lists available spare parts with item numbers for ordering.
Details compatible cables and surge suppressors with item numbers.
