Edwards EXT75iDX - Page 2

Document Template: 02B01010 Attachment 4 Iss. 1
Declaration of Conformity
We, Edwards Limited,
Crawley Business Quarter,
Manor Royal,
Crawley,
West Sussex, RH10 9LW, UK
declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the
technical file, that the product(s)
 EXT75iDX NW40 (interstage) B722-35-000
 EXT75iDX ISO63/NW16 (interstage) B722-37-000
 EXT75iDX ISO63/NW25 (interstage) B722-38-000
 EXT75DX ISO63 B722-41-000
 EXT75DX CF63 B722-42-000
 EXT75DX NW40 B722-43-000
 EXT75DX ISO100 B722-45-000
 EXT75DX ISO100 (NW25 B-PT) B722-46-000
 EXT75DX ISO63 Reversed B722-48-000
to which this declaration relates is in conformity with the following standard(s) or other normative
document(s)
EN1012-2:1996, A1: 2009 Compressors and Vacuum Pumps. Safety Requirements. Vacuum Pumps
EN61010-1: 2010 Safety Requirements for Electrical Equipment for Measurement, Control and
Laboratory Use. General Requirements
EN61326-1: 2006 Electrical equipment for measurement, control and laboratory Use. EMC
requirements. General requirements
C22.2 61010-1-04: 2004 Safety requirements for electrical equipment for measurement, Control and
laboratory use – Part 1: General requirements
UL61010-1, 2nd Edition Safety requirements for electrical equipment for measurement, Control and
laboratory use – Part 1: General requirements
EN50581: 2012 Technical Documentation for the Assessment of Electrical and Electronic
Products with respect to the Restriction of Hazardous Substances
and fulfils all the relevant provisions of
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
2004/108/EC Electromagnetic Compatibility (EMC) Directive
2011/65/EU** Restriction of Certain Hazardous Substances (RoHS) Directive
** i.e. The product(s) contain less than - 0.1wt% for hexavalent chromium, lead, mercury, PBB and PBDE; 0.01wt% for
cadmium - in homogeneous materials (subject to the exemptions allowed by the Directive). The RoHS Directive does
not legally apply to industrial vacuum equipment until July 2019 (July 2017 for instruments).
Note: This declaration covers all product serial numbers from the date this Declaration was signed
onwards.
13.01.2014, Burgess Hill
Peter Mea
r
es
GV Technical Support Manager
Date and Place
P200-01-020 Issue G
This product has been manufactured under a quality system certified to ISO9001:2008