To Next PageTo Next Page
Need help?Do you have a question about the Edwards EXT255H Series and is the answer not in the manual?
General| Inlet flange | NW40 |
|---|---|
| Outlet flange | NW25 |
| Operating voltage | 380-415V |
| Frequency | 50/60 Hz |
| Flow Rate | Unknown |
| Maximum Head | Unknown |
| Horsepower | Unknown |
| Voltage | 380-415V |
| Inlet Size | NW40 |
| Outlet Size | NW25 |
| Material | Unknown |
| Weight | Unknown |
Lists suitable gases, conditions for oxygen/water vapour, and warnings for explosive or aggressive gases.
Instructions for safely unpacking, checking for damage, and verifying contents of the pump shipment.
Guides on connecting the pump to the vacuum system, covering inlet, backing, and interstage connections.
Explains how to connect and control vent valves, including manual and solenoid types, and vent-restrictors.
Covers electrical connections, including the EXDC drive module, grounding, and safety precautions.
Outlines cooling requirements, recommending water-cooling or forced-air for different operating conditions.
Step-by-step guide for starting the EXT pump system, including backing pump and drive module.
Procedures for safely shutting down the EXT pump, including emergency shutdown and vent valve operation.
Lists common pump symptoms, checks, and recommended actions for troubleshooting and resolving issues.
