Need help?Do you have a question about the Edwards GXS 450/2600 and is the answer not in the manual?
General| Brand | Edwards |
|---|---|
| Model | GXS 450/2600 |
| Category | Water Pump |
| Language | English |
Details pumping speed, ultimate pressure, and maximum continuous inlet pressure for GXS pumps.
Covers motor ratings, current, protection, cable sizes, and mains connectors for GXS systems.
Instructions for safely moving, positioning, and levelling the dry pumping system.
Guidance on connecting inlet/exhaust, pipeline support, and pressure gauges.
Emphasizes the importance of leak testing to prevent substance leakage.
Covers safety, protection, and connection requirements for the electrical supply.
Explains connecting customer control equipment to the EMS connection for emergency stops.
Details connecting cooling water supply, removing plugs, and fitting strainers.
Procedures for initial startup, checking supplies, and starting the pump system.
Step-by-step instructions for powering on and initiating the pump system.
Guide to operating the pump using the Pump Display Terminal (PDT).
Instructions for controlling the pump directly from the front panel.
Procedures for safely stopping the pump manually, including Fast and Auto modes.
Explains how alarms trigger automatic shutdown and how to investigate warnings.
How to use the emergency stop switch for immediate shutdown.
Procedures for safely restarting the pump after a shutdown event.
Describes the process for cleaning the pump mechanism using high flow purge or solvent.
How to adjust pump speed and use the PID controller for pressure regulation.
General safety precautions and frequency recommendations for maintenance tasks.
Instructions for checking and topping up oil levels in the pump and booster.
Methods for controlling pump speed, including Normal, External Voltage, and SIM protocol.
Instructions for configuring and using the PID controller for pressure regulation.
Details on how alarms are indicated and what actions they trigger.
To Next Page