Figure A
Incorrect use - material supported
on one blade
Figure B
Correct use - material supported
by two blades
Figure C
Correct use - material supported
by three blades
16
Notcher Operation
1. Clear the feed table of the notcher station of any tools or debris
prior to powering the machine on.
2. Turn machine on. The top notcher blade will be in the neutral posi-
tion. Push the material under the tooling guard and into the blade
area. Position your material to the desired cut.
3. Clear your hands from the working area and press the foot pedal
to activate the notcher station. When the cut is complete, release
the foot pedal to automatically return the top notcher blade to the
neutral position.
To Next Page
Loading...