1 General
Operator and Supervisor Information
Signal Word De nition
Signal Word Panel
2 Maintenance Precautions
Maintenance Schedule
4 Punch
Punch and Die Operating Clearances
Punch Tonnage Requirements
6 Pedestal Die
Punch and Die Operating Clearances
Punch Tonnage Requirements
Optional Tooling Maintenance
7 Notcher (25/40/55/100Ton)
Remove and replace moving blade
Remove and replace stationary blade
8 Angle Notcher
Remove and replace moving blade
Remove and replace stationary blade
9 Oversize Punch
Punch and Die Operating Clearances
Punch Size Tolerances
10 Pipe Notcher
Remove and replace moving blade
Remove and replace stationary blade
11 Brake Tooling
Remove and replace moving punch
Remove and replace stationary 4-way die
12 Rod Shear/Multi-Shear
Remove and replace moving blade
Remove and replace stationary blade
13 241 Punch Tooling
Punch and Die Operating Clearances
Punch Tonnage Requirements
Operator and Supervisor Information
This is one of four manuals supplied with your machine.
• Installation Manual
• Safety Instructions Manual
• Operations Manual
• Maintenance Manual
READ ALL MANUALS BEFORE OPERATING MACHINERY. Operating
machinery before reading and understanding the contents of all four
manuals greatly increases the risk of injury.
Each of the four machine manuals describes ‘best practices’ in han-
dling, installing, operating and maintaining your machine. The contents
of each manual is subject to change without notice due to improvements
in the machinery or changes in National or International standards.
All rights reserved. Reproduction of this manual in any form, in whole or
in part, is not permitted without the written consent of Edwards Manu-
facturing Company.
Keep all manuals close to the machine to allow for easy reference when
necessary.
Provide operators with suf cient training and education in the basic
functions of the machine prior to machine operation.
Do not allow for operation of the machine by unquali ed personnel. Ed-
wards Manufacturing Company is not liable for accidents arising from
unskilled, untrained operation.
Do not modify or change the machine without written authorization from
Edwards Manufacturing Company. Unauthorized modi cation to a ma-
chine may result in serious operator injury, machine damage and will
void your machine warranty.
Never leave a powered machine unattended. Turn machinery OFF be-
fore walking away.
This machine is manufactured for use by able bodied and able minded
operators only. Never operate machinery when tired or under the in u-
ence of drugs or alcohol.
Do not resell, relocate or export to a destination other than to the original
point of sale. Edwards has designed this machine to meet the stan-
dards of the original receiving country and is not liable for meeting any
governing body or performance standards beyond those of the original
receiving country.
Maintenance Manual Table of Contents
To Next Page
Loading...