7
Notice Panel
Ironworker Operation
This manual outlines the basic functions
associated with typical Ironworker opera-
tions and is neither intended to create a
comprehensive list of, nor describe every
operation possible with an Ironworker
tool. Ironworker machines are designed to
punch, shear and notch mild steel (A36)
plate, barstock and angle. A wide range of
accessories are available to fabricate rod,
square stock, sheet metal and pipe. DO NOT
USE THIS EQUIPMENT FOR ANY PURPOSE
NOT DESCRIBED IN THE MANUALS.
Ironworker machines are dangerous
and require extreme care and caution
in the safe installation, operation and
maintenance of the machinery. Edwards
Manufacturing Company strongly sug-
gests reading and understanding all
manuals associated with the machinery
as well as obtaining certi ed, techni-
cal, industrial machinery operations
and maintenance training to reduce the
risk of injury. Regardless of the contents
of the machinery manuals Edwards
Manufacturing Company will not be held
liable for accidents caused by lack of
training.
Wear Personal Protective
Equipment
To avoid physical hazard, always wear per-
sonal protective equipment. Wear protec-
tive eyewear, clothing, gloves, footwear,
head-gear and hearing protection while
operating or servicing this machinery.
Forklift Location
This machine is equiped with rated fork-
lift movement points. Do not attempt to
lift the machinery by any other means.
Inappropriate movement of the machin-
ery may result in serious operator injury,
machine damage and will void machine
warranty. Consult the installation manual
for equipment weight ratings. Provide
rated forklift and certi ed forklift operator
to move machinery to appropriate location.
Refer to Manuals:
Safety, Installation, Operations
and Maintenance
Manuals contain critical instructions
regarding proper procedures for your
machinery. Understand the contents of all
manuals thoroughly. Failure to follow proper
procedures may result in serious operator
injury, machine damage and will void your
machine warranty. Keep manuals close to
the machine for easy reference.
Safety Ground
Safety earth ground location.
Do Not Use Non-Approved
Lubricants
This machine requires lubrication of
moving mechanical parts (grease) and the
maintenance of hydraulic uids. Consult
maintenance manual for speci c lubrication
requirements and application or mainte-
nance schedules.
PE
‘Protective earth’, electrical grounding
location.
Additional Graphic
Information
Electric Motor Rotation (Above)
Identi cation of proper electrical motor
rotation.
Hydraulics
Hydraulic uids must be recycled as
required by local environmental law. Do not
dispose of by adding to the municipal waste
stream.
To Next Page
Loading...