Need help?Do you have a question about the Edwards iXH3050HTX and is the answer not in the manual?
General| Brand | Edwards |
|---|---|
| Model | iXH3050HTX |
| Category | Water Pump |
| Language | English |
Presents general technical specifications including dimensions, mass, noise, and vibration.
Details typical peak pumping speed, ultimate vacuum, and maximum continuous inlet pressure.
Details electrical specifications including motor ratings, current, fuse sizes, and cable requirements.
Instructions for safely locating and positioning the dry pumping system.
Guides connecting the pump to vacuum and exhaust extraction systems.
Addresses risks and safety measures for pumping flammable or pyrophoric materials.
Procedure for leak testing the system after installation to prevent leaks.
Ensures correct electrical installation, protection, and earthing for the pumping system.
Instructions for connecting the electrical supply cable using Harting connectors.
Details connecting the system to an external emergency stop circuit or control equipment.
Procedure for connecting and setting up the cooling water supply for optimal operation.
Steps to commission the system, including checking power, supplies, and controls.
Steps to safely start the system, including checks on power, water, and gas supplies.
Procedures for manually shutting down the pumping system.
Details automatic shut-down behavior based on alarm conditions and 'Run 'til crash' setting.
Lists pump protection sensors, warning, and alarm conditions.
Explains how to use the emergency stop switch and its effect on system operation.
Procedure for restarting the pump after an emergency stop or automatic shut-down.
Safety precautions and general guidelines for maintenance frequency and procedures.
Procedures and precautions for transporting the pumping system.
Safety and environmental requirements for disposing of the system and its components.
Explains pump controller alarms, system shutdown, and indication via LEDs and PDT.
To Next Page