LaserSense HSSD-2 Aspirating Smoke Detector Installers Handbook 13
Chapter 2
Installation and assembly
Summary
This chapter provides information necessary to install and configure the detector
system.
Content
Introduction 14
Antistatic precautions 15
General installation guidelines 15
System design 17
Pipework 18
Mechanical installation 19
Removing and replacing the front cover 21
Electrical installation 22
Detector terminal block connections 23
Command module terminal block connections 25
Connecting power cables 26
Power supply connections 28
Demonstration mode 29
Interfacing with fire alarm panels 30
Setting the detector address 30
Connecting a detector network to a command module 30
Fault-tolerant detector loop configuration 32
Nonfault-tolerant serial configuration 32
Connecting a command module to an addressable fire panel 33
Connecting a single detector to an addressable fire panel 35
Connecting to a PC 35
To Next Page
Loading...
