Chapter 3: Programming the unit
38 LaserSense HSSD-2 Aspirating Smoke Detector Installers Handbook
Battery check enable 50
Mains check enable 50
Aspirator speed 50
Flow setup 50
Airflow monitoring 51
Chart log recording rate 51
User defined access code 52
Bms protocol 52
Factory default 52
Auto-learn scan devices 53
Looped bus (class A) network wiring connection 53
Poll timeout 53
Call centre 53
Password 53
Pager 54
Page on fault 54
Page on alarm 54
View event log 54
Diagnostics 54
Detector read 54
Loop errors 54
Dust separator condition 55
Relay tests 55
Watchdog trip count 55
Event log 55
Introduction
The detector can be configured and programmed with the use of the front panel
controls or interface to a PC.
To Next Page
Loading...
