Edwards nXL110i User Manual

The pump is supplied xed by metal brackets to a wooden pallet with a cardboard surround.
These met
al brackets should be removed and retained.
• Take care when unpacking the pump to avoid excessive shocks which could damage
the bearings and reduce the life of the pump.
• If the pump is damaged, nofy the supplier and carrier immediately stang the part
number and serial number of the pump together with the order number and the
supplier's invoice number. Retain all packing materials for inspecon.
• Do not use the pump if it is damaged.
• Open the cardboard box from the top, remove any excess packaging as required. It is
advised to retain all packing materials for use should the pump be returned for
service.
• Check that the package contains the items listed in Table 3 on page 16. If any of
these items are missing, nofy the supplier in wring within three days.
• If the pump is not to be used immediately, store in suitable condions as described
in Storage on page 28.
• The pump is supplied with the inlets and outlet sealed to prevent entry of dust and
vapour. Do not remove these seals unl ready to install the pump on the vacuum
system.
Table 3
Checklist of items
Quanty Descripon Check
1 nXLi vacuum pump
❏
3 Liing eye
❏
1 Instrucon manual CD (P450-00-000)
❏
Mechanical installaon
WARNING:
Heav
y object. Risk of physical injury. Use suitable liing equipment.
WARNING:
Ensure tha
t any cabling and or pipe work aached to the pump are routed carefully to
avoid causing a slip/trip hazard and to prevent any damage to the cable.
WARNING:
Risk of injury or damag
e to equipment. Ensure that the maximum angle between paired
slings used to li the system is 45°. Increased angle could compromise liing eye
integrity.
A770-10-880A - Installaon
Page 16

Edwards nXL110i Specifications

General

Brand	Edwards
Model	nXL110i
Category	Water Pump
Language	English