Safety and compliance
Denion of Warnings and Cauons
Important safety informaon is highlighted as WARNING and CAUTION instrucons; these
instrucons must be obeyed.
The use of WARNINGs and CA
UTIONs is dened below.
WARNING:
Warnings ar
e given where failure to observe the instrucon could result in injury or
death to people. The actual symbol shown varies according to the hazard.
CAUTION:
Cauons are given where failure to observe the instrucon could result in damage to
the equipment, associa
ted equipment or process.
Safety symbols
The saf
ety symbols on the products denote areas where care and aenon is required.
The following safety symbols may be used on the nXLi and throughout the product
documentaon.
Warning/Cauon
An appropriate safety instrucon should be followed or cauon to a
potenal hazard exists.
Warning - Dangerous Voltage
Indic
a
tes hazards arising from dangerous voltages.
Warning - Hot Surfaces
Indic
a
tes that the marked item may be hot and should not be touched
without taking precauons.
Protecve conductor (ground)
T
o idenfy an
y terminal intended for connecon to an external conductor
for protecon against electric shock in case of a fault, or the terminal of a
protecve earth (ground) electrode.
Warning - Heavy Object
Indic
a
tes the potenal risk of physical injury and requires suitable liing
equipment to move.
Warning - Use protecve equipment
Indic
a
tes that appropriate protecve equipment must be used.
A770-10-880A - Safety and compliance
Page 9