Edwards VolumeView EV1000 User Manual

System Setup
VolumeView sensor
VolumeView femoral arterial catheter
VolumeView thermistor manifold
Edwards Oximetry Central Venous Catheter
TruWave pressure transducer
Oximetry cable
1
2
3
4
5
6
1
2
3
4
5
6
VolumeView Set EV1000 Clinical Platform
Setup Guide
For professional use. See instructions for use for full prescribing
information, including indications, contraindications, warnings,
precautions and adverse events.
Edwards Lifesciences devices placed on the European market
meeting the essential requirements referred to in Article 3 of
the Medical Device Directive 93/42/EEC bear the CE marking of
conformity.
Edwards, Edwards Lifesciences, the stylized E logo,
EV1000, TruWave, and VolumeView are trademarks
of Edwards Lifesciences Corporation.
© 2018 Edwards Lifesciences Corporation.
All rights reserved. ENP509/11-18/CC
Edwards Lifesciences • Route de l’Etraz 70,
1260 Nyon, Switzerland • edwards.com

Edwards VolumeView EV1000 Specifications

General

Device Category	Hemodynamic Monitoring System
Manufacturer	Edwards Lifesciences
Display	Touchscreen LCD
Parameters Measured	Cardiac Output (CO), Stroke Volume (SV), Stroke Volume Variation (SVV), Systemic Vascular Resistance (SVR)
Connectivity	Ethernet, USB
Power Supply	100-240 VAC, 50/60 Hz

Summary

EV1000 Clinical Platform Startup with VolumeView Set

System Startup Steps

Steps for powering on the monitor, entering patient data, and setting up sensors and transducers.

Thermodilution Bolus - VolumeView Set

Thermodilution Procedure Steps

Detailed steps for inserting catheters, connecting components, and initiating the thermodilution procedure.