EasyManua.ls Logo

Edwards ES100 User Manual

Edwards ES100
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
A352-03-880
Issue B
Instruction Manual
ES65 / ES100 / ES200 / ES300 and ES630
Single Stage Rotary Vane Pumps
Description Item Number
ES65 - ASIA 200 V (50/60 Hz) and 380 V (60 Hz) IE3 A352-47-934
ES65 - EU/USA/CHINA 380-400 V (50 Hz) and 230/460 V (60 Hz) IE3 A352-47-940
ES100 - ASIA 200 V (50/60 Hz) and 380 V (60 Hz) IE3 A352-52-934
ES100 - EU/USA/CHINA 380-400 V (50 Hz) and 230/460 V (60 Hz) IE3 A352-52-940
ES200 - ASIA 200 V (50/60 Hz) and 380 V (60 Hz) IE3 A352-57-934
ES200 - EU/USA/CHINA 380-400 V (50 Hz) and 230/460 V (60 Hz) IE3 A352-57-940
ES300 - ASIA 200 V (50/60 Hz) and 380 V (60 Hz) IE3 A352-62-934
ES300 - EU/USA/CHINA 380-400 V (50 Hz) and 230/460 V (60 Hz) IE3 A352-62-940
ES630 - ASIA 200 V (50/60 Hz) and 380 V (60 Hz) IE3 A352-67-934
ES630 - EU/USA/CHINA 380-400 V (50 Hz) and 230/460 V (60 Hz) IE3 A352-67-940
Original Instructions

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Edwards ES100 and is the answer not in the manual?

Edwards ES100 Specifications

General IconGeneral
BrandEdwards
ModelES100
CategoryMedical Equipment
LanguageEnglish

Summary

1 Introduction

2 Technical data

2.2 Performance

Lists key performance specifications like displacement, speed, and ultimate vacuum.

2.3 Mechanical data

Specifies physical dimensions, port sizes, and noise levels for the pumps.

2.4 Electrical data: three-phase motors

Provides voltage, frequency, and power ratings for the pump motors.

3 Installation

3.1 Safety

Outlines essential safety precautions and warnings for pump installation.

3.5 Fill the pump with oil

Explains the procedure for filling the pump with the correct type and amount of oil.

3.6 Electrical installation

Covers connecting the pump motor to the electrical supply and checking voltage.

3.7 Connect the pump inlet to the vacuum system

Guides on connecting the pump's inlet port to the vacuum system.

3.8 Connect the pump outlet to the vacuum system

Details how to connect the pump's outlet to the exhaust system.

4 Operation

4.2 Start up procedure

Provides steps for safely starting the vacuum pump.

4.3 To achieve ultimate vacuum

Outlines the procedure for reaching the pump's ultimate vacuum level.

4.4 To pump condensable vapours

Details how to use gas ballast when pumping condensable vapors.

5 Maintenance

5.1 Safety

Lists crucial safety precautions to follow during maintenance procedures.

5.12 Basic fault finding

Introduces troubleshooting common pump issues and their causes.

7 Service, spares and accessories

Related product manuals