Edwards ES100

© Edwards Limited 2015. All rights reserved. Page 3
Edwards and the Edwards logo are trademarks of Edwards Limited.
Introduction
A352-03-880 Issue B
Figure 3 - ES630 pump
Space needed:
A. 200 mm (Cooling)
B. 400 mm (Maintenance access)
C. 500 mm (Maintenance access
and cooling)
1.
Motor terminal box
2. Oil filler plug
3.
Lifting bracket
4. Inlet and integral non-return valve
5. Exhaust
6. Gas ballast control
7. Oil level sight glass
8. Oil drain tap
9. Accessory plate