Edwards ES100

A352-03-880 Issue B
Page 26 © Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Maintenance
5.7 Replace the gas ballast filter - (part of minor service)
Figure 11 - Gas ballast filter, ES65/ES100/ES630
For the ES65 and ES100:
1. Remove the cover (Figure 11, item1) and replace the filter (2), the two seals (3) and the valve (4).
2. Replace the foam filter placed on the polymer tube.
For the ES630, remove the cover (1) and replace the filter element (2).
Figure 12 - Gas ballast filter, ES200/ES300
For the ES200 and ES300:
1. Remove the cover (Figure 12, item1) and replace the filter element (2).
2. Replace the foam filter placed on the polymer tube.
1. Cover
2. Filter
3. Seal
4. Valve
1. Cover
2. Filter element