Edwards ES100

© Edwards Limited 2015. All rights reserved. Page 49
Edwards and the Edwards logo are trademarks of Edwards Limited.
Service, spares and accessories
A352-03-880 Issue B
Figure 26 - ITM inlet dust filters
A. Inlet chemical trap
B. Inlet dust filter
1. Inner cover
2. Chemical trap basket assembly
3. Not used
4. Dust filter element
5. Dust filter locating spacer
6. Top gasket
7. Dust filter bottom gasket
8. High-capacity dust filter element
9. Hand wheel
10.Bezel
11.Gasket
12.Sight glass cover
13.Sight glass
14.Trap body
15.Drain plug
16.Outlet port
17.Outlet flange fixing screws
18.Not used
19.Not used
20.Not used
21.Not used
22.Inlet port
23.Chemical trap bottom gasket