A352-03-880 Issue B
Page 42 © Edwards Limited 2015. All rights reserved.
Edwards and the Edwards logo are trademarks of Edwards Limited.
Service, spares and accessories
7.4.8 PT100 temperature sensor (ES200/ES300)
Figure 20 - ES200/ES300 PT100 temperature sensor
Fitting Instructions (refer also to Table 13):
1. Drain oil from pump.
2. Remove the blank plate (Figure 20, item 2) and O-ring.
3. Clean the area where the PT100 temperature sensor (1) will be fitted.
4. Carry out a visual check on the sealing face of both the pump and the PT100 temperature sensor.
5. Secure using fixings provided.
Product Item Number
ES200/ES300 PT100 temperature sensor A352-77-813
To Next Page
Loading...
