4
2.3 Environmental Conditions
Operating Environment
Temperatures:0° - 40° C (32-104F)
Relative humidity: 20% - 80%
Altitude: 2,000 meters (6,560 inches)
Please keep unimpeded around the units for good ventilation and convenient maintenance.
The instrument should also be protected against temperature extremes which may cause
condensation within the instrument.
Storage and Shipping Environment
This instrument may be stored or shipped in environments with the following limits:
Temperature......................... -40° to +55°C
Altitude: …………………… 7,620 meters (25,000 inches)
The instrument should also be protected against temperature extremes, which may cause
condensation within the instrument.
Packaging
Original Packaging
Please retain all original packaging materials that you originally received. If you are
returning your instrument to us for servicing please repackage the instrument in its original
container. Please enclose the instrument with all options, accessories and test leads.
Indicate the nature of the problem or type of service needed. Also, please mark the
container "FRAGILE" to insure proper handling.
Other Packaging
If you do not have the original packaging materials, please follow the below guidelines:
Wrap the instrument in a bubble pack or similar foam. Enclose the same information as
above.
Use a strong double-wall container that is made for shipping instrumentation. 350 lb.
test material is adequate.
Use a layer of shock-absorbing material 70 to 100 mm (3 to 4 inch) thick around all sides of
the instrument. Protect the control panel with cardboard.
Seal the container securely.
Mark the container "FRAGILE" to insure proper handling.
To Next Page
