MV-2502-2508-08-2022
.
eeese-aircare.com © All rights reserved eeese air care a/s
81
UK
6. Cleaning
When used regularly, the lter may become clogged with dust and particles. Therefore the
lter should be cleaned at least every two weeks. Follow these steps:
1
Switch the device o and remove the plug from the socket
before cleaning.
2
Clean the housing with soft, dry cloth. If the device is ex-
tremely dirty, use a mild cleaning agent. Wipe the dehumidi-
er with a slightly damp cloth. Never spray the device with
water.
3
Remove the grate, clean the grate with a vacuum cleaner or
soapy water no hotter than 40°C.
4
Rinse and dry the grate completely before installing back to
the device.
7. Storage
If the dehumidier will not be used for a long period of time, take the following steps:
1. Remove the plug from the socket and empty the tank, make sure the tank and the
dehumidier is completely dry. This may take a couple of days.
2. Clean the air lter.
3. Check the dehumidier for perfect condition to ensure a safe use of it after a long
period of storage.
4. Pack the device with the suitable packaging.
5. Store the dehumidier in a dust-free location, and out of direct sunlight. Preferably
covered with a sheet of plastic.
To Next Page
Loading...
