MV-2556-2557-08-2022 eeese-aircare.com © All rights eeese air care aps
93
UK
At Sleep mode, press any button to wake up the unit and then you can operate
the unit as usual.
Air Purifying Mode
Press the Mode Button (A) until the Air Purier and Ionizer indicator (B) shows on the
display (B). The unit works with high fan speed without dehumidifying, it will only purify
the air.
The ionizer function can be turned o by pressing the Mode button for 2 seconds.
Built in Ionizer
The ionizer creates negative ions that attach to positive charged molecules such as dust,
bacteria, pollen, smoke, and other allergens. These molecules attach to each other into
bigger molecules that cannot oat in the air and falls to the ground.
Press the Mode button (A) for 2 seconds to activate the ionizer function. The ionizer
indicator will show on the display once activated (B). Inactivate it by pressing the Mode
button for 2 seconds again. Note that the ionizer indicator disappears.
If the fan stops working, the ionizer function will automatically be deactivated.
A
B B
A
B
To Next Page
Loading...
