eeese Otto - Page 10

MV-2553-2554-08-2022 eeese-aircare.com © All rights eeese air care aps
93
UK
then the unit will run until that level is reached. And if the humidity is below the selected
percentage, the unit will not run.
If the ambient humidity is lower than 30% the display will show LO
If the ambient humidity is higher than 90% the display will show HI
Auto Dehumidication
Press the Auto button (A) to enter into the Auto Dehumidifying Mode, the unit runs auto-
matically accordance to the ambient humidity detected below.
Ambient RH% detected Compressor Fan Speed Level
RH%>65% Working High
55%≤RH%≤65% Working Low
RH%<55% Stops Working Low
RH = Relative humidity
Timer Setting
When the unit is turned on, press the Timer button (A) and select between 1-24hr to
select your preferred timer duration before automatic shuto setting. The timer indicator
will be activated on the display (B).
B
A
A
B