EasyManua.ls Logo

eeese Otto - Cleaning the dehumidifier

eeese Otto
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MV-2552-03--2021 eeese-air-care.com © All rights eeese air care aps
79
UK
Automatic Shut O
When the water tank becomes full during normal use, the unit shuts o automatically
with Full tank indicator on the screen and buzzer alarm goes o for 5 times.
If water tank is removed or not placed properly, above phenomenon will appear also.
Automatic Defrost Feature
The unit is equipped with an automatic defrost feature. When room temperature drop to
4°C and below, the compressor shuts o and the unit runs on high fan speed setting until
the frost has disappeared, no other setting can be made for this feature. Its correspond-
ing indicator will be displayed on screen.
Memory Feature
When recovering from a power failure, the unit will work with the mode prior to the
shutdown. It means the timer setting, humidity setting and working mode setting
will be kept.
6. Cleaning the dehumidier
When used regularly, the lter may become clogged with dust and particles. To ensure
the eectiveness of the dehumidier, it is recommended to clean the unit at least every
two weeks:
Switch the device o and remove the plug from the socket
before cleaning.
Clean the housing with a soft, dry cloth. Vacuum clean the
air inlet and outlet grilles of the dehumidier. If the device is
extremely dirty, use a mild cleaning agent. Wipe the dehumid-
ier with a slightly damp cloth. Remove the water tank and
wash it by hand using a mild detergent. Rinse it with clean
water
Note: Do not spray water directly onto the unit.
Cleaning and user maintenance shall not be made by children
without supervision.

Table of Contents

Other manuals for eeese Otto

Related product manuals