HD490 Smart Encoder
11 Copyright © 2000-2012 EEG Enterprises, Inc.
All Rights Reserved.
Decoder Setup Menu
Decoder On/Off Turns the on-screen decoder display on or off. Use the UP and DOWN
keys to select an option, then press ENTER to exit and apply changes
or CANCEL to exit and cancel changes.
708 Font Selects the display font for the decoder output. Choose “Default” to see
the font style as it is encoded in the 708 caption data. Fonts are only
selectable when a 708 caption service is selected for decoding.
708 Size Selects the display size for the decoder output. Choose “Default” to see
the font size as it is encoded in the 708 caption data. The decoder can
also be forced to Small, Standard, or Large for easier viewing. Size
selection is only available when a 708 caption service is selected for
decoding.
708 Opacity Selects the opacity of the caption display for the decoder output. Choose
“Default” to see the colors and opacity as they are encoded in the 708
caption data. Opacity is only selectable when a 708 caption service is
selected for decoding.
Set HD Service Selects the service on an HD master video that is decoded to create the
caption display on the decoder output. The DE280 can display 708
caption Services 1 through 6, or 608 downconversion data for caption
channels CC1 through CC4. If an SD master video source is connected,
this setting is ignored.
Set SD Service Selects the service on an SD master video that is decoded to create the
caption display on the decoder output. Choose CC1 through CC4. If an
HD master video source is connected, this setting is ignored.
Subtitle Mode Setting Subtitle Mode On creates a display with yellow foreground text
and a transparent background appropriate for creating open caption
displays for subtitling.
To Next Page
Loading...
