Need help?Do you have a question about the EEG iCap HD492 and is the answer not in the manual?
Details the HD492 iCap Encoder as an industry-standard solution for digital closed captioning and HD VANC encoding.
Highlights key features of the HD492 iCap Encoder, including iCap connectivity, Lexi support, and various captioning modules.
Explains how to configure the encoder's network settings for access to iCap, Lexi, and the web interface.
Describes how to connect video sources to the encoder and where output captions will appear.
Details how to send test captions to verify the encoder's initial setup and functionality.
Provides an in-depth explanation of the audio setup menu options available on the encoder's front panel.
Details the security modes and password protection features to control access to the encoder's web interface.
Details the steps to connect the encoder to the iCap network via the web interface and verify the connection status.
Explains the importance of the iCap Access Code and where to find it for caption service provider use.
Outlines the process for coordinating testing with a caption service provider to ensure audio and caption data flow.
Describes methods to verify that audio and caption data are being successfully transmitted and received via iCap.
Details the prerequisite of confirming iCap connectivity and obtaining the iCap Access Code before setting up Lexi.
Provides instructions on how to configure the Lexi automatic captioning module on the encoder via the web interface.
Explains how to use the built-in modem for dial-up captioning and connection status indicators.
Describes how to enable and use telnet for captioners to connect to the encoder.
Details serial port configurations for connecting teleprompters and other devices using RS-232 and RS-422.
Explains how caption bridging works, copying captions between different video inputs and outputs.
Describes the capability of captioning to two independent video channels simultaneously.
Details how to use GPI triggers for on-command placement control of closed captions on the output.
Details the Caption Absence Alarm feature for automatically alerting users when caption presence is not detected.
Explains how to block caption input from specific sources using GPI functions.
Provides instructions on capturing VANC or 608 data to a USB stick for review or troubleshooting.
Details the components and indicators found on the front panel of the HD492 iCap Encoder.
Describes the function of the control pad buttons used for navigating the encoder's front panel menus.
Explains the function of the USB port on the front panel for firmware upgrades.
Details the various connectors and ports located on the rear panel of the HD492 iCap Encoder.
Describes the serial ports, including their protocols (RS-232, RS-422) and data capabilities.
Explains the LAN port for network connectivity, enabling web interface access.
Details the GPI input switches and GPO output notifications for encoder control and monitoring.
Describes the balanced audio input for LTC time code, used with the CCPlay feature.
Explains the balanced audio input for program companion audio, used for iCap transmission.
Details the pin assignments for the General Purpose Inputs (GPIs) using the upper 16-pin connector.
Details the pin assignments for the General Purpose Outputs (GPOs) using the lower 16-pin connector.
Describes the GPI function to force 608 caption data up-conversion onto HD video outputs.
Explains the GPI function to disable dial-up modem input for data entry.
Details the GPI function to disable serial port 2 (P2) for caption data input.
Describes the GPI function to ignore local caption data and regenerate upstream caption data.
Notes that GPI inputs E through H are currently not assigned to specific functions.
Explains the GPO function to monitor the iCap server connection status.
Details the GPO function to monitor real-time caption data activity for CC1/S1 via iCap.
Indicates that other GPO outputs do not have currently defined functionality.
Details the pinout for the RS-232 serial communication protocol.
Details the pinout for the RS-422 serial communication protocol.
Details the pinout for the RS-422 Sony serial communication protocol.
Lists specifications related to the HD-SDI video input ports, including connector type and signal levels.
Details specifications for the HD-SDI video output ports, including number of outputs and protection.
Specifies the types and connectivity of data ports, including LAN, USB, Serial, Modem, and GPI/GPO.
Details the specifications for the audio input ports, including time code and program audio.
Describes the components of the encoder's front panel, such as the display and controls.
Provides physical dimensions and rack mount information for the encoder unit.
Lists electrical specifications, including power supply requirements and consumption.
Explains the fundamental concept of encoder commands and how to use them for manual or software control.
Details commands for local entry modes, including regeneration, pass-thru, and real-time modes.
Lists commands related to HD output types, such as VANC insertion and serial output configuration.
Provides commands for enabling XDS entry and loading XDS packets.
Details commands for loading default and NVM XDS packets and sampling entries.
Explains the command to report the status of the XDS queue.
Details commands related to URL encoding for message input and output.
Lists commands used to query the encoder's status, such as identification and port activity.
General| Brand | EEG |
|---|---|
| Model | iCap HD492 |
| Category | Media Converter |
| Language | English |
To Next Page
