EEG HD490 - Section 2: Installation; Front Panel

HD490 Smart Encoder
3 Copyright © 2000-2012 EEG Enterprises, Inc.
All Rights Reserved.
Section 2: Installation
Front Panel
LCD Display Control Pad
Insert On
LED
Power On
LED
Insert On /
Bypass
Power
Switch
USB
Port
SMART ENCODER
MODEL HD490
eeg
eeg enterprises, inc.
farmingdale, ny 11735
Power Switch This is the on/off switch for the unit.
Power On LED The Power On LED will light steady green when the unit is powered on.
Insert On Toggles the Encoder between active operations and Relay Bypass mode.
In Relay Bypass mode, the signal at the master video input is routed
directly through to the master video output, while the signal at the
auxiliary video input is routed directly through to the auxiliary/decoder
video output. Video output 2 is inactive.
Insert On LED The Insert On LED will light green when the unit is in active operating
mode. The LED will turn off when the Encoder is in Relay Bypass
mode.
eeg