EemaX LavAdvantage SPEX8208T User Manual

4
1) MOUNTING THE UNIT TO THE WALL
THIS HEATER MUST BE INSTALLED IN A LOCATION WHERE IT IS NOT SUBJECT TO
FREEZING TEMPERATURES.
1. The heater should be mounted under the sink as close to the point-of-use as possible. Ideal position is
fittings pointed down, but the heater can be mounted in any orientation.
Note: an additional logo decal has been provided to ensure branding is clearly displayed in any mounting
orientation.
2. Make sure to leave a minimum of 8 inches service
clearance at the end OPPOSITE the fittings.
3. Remove the cover and fasten to the wall using the
four mounting holes at each corner of the back plate.
Replace the cover.
Decal here

EemaX LavAdvantage SPEX8208T Specifications

General

Brand	EemaX
Model	LavAdvantage SPEX8208T
Category	Water Heater
Language	English