14
1. Open the packaging.
2. Now you can mount the cable holder on the back of your SolMate®. You can leave the storage
unit in the opened packaging for this step.
3. Now insert the small stand feet into the bottom of the storage unit.
There are various options for positioning and mounting the storage unit. It can be either
mounted on the house wall or placed using a stand base.
Caution: If you choose to mount or position the device on the wall, first connect the cables
(power cable and PV connection cable) to SolMate® and secure them in the cable guide on
the back of the device.
UNPACKING & MOUNTING THE STORAGE UNIT
1.
2. 3.
To Next Page
Loading...