EET SolMate - Page 15

15
Standing Wall Mount
The device is mounted standing on the floor against
the wall and supports itself. The mounting bracket on
the wall prevents it from tipping forward.
Wall Stand Base
SolMate® can also be positioned flush against the
wall without drilling or adhesive. The stand base
prevents it from tipping forward.
To install, attach the upper part of the stand base to
the metal frame with the long side facing outward
(see Fig. 3.1). Then, secure the stand base to
SolMate® using two screws.
Freestanding Stand Base
With the stand base, SolMate® can also be placed
freely in the room, standing independently wherever
you find a suitable and protected location.
To install, attach the upper part of the stand base to
the metal frame with the long side facing inward (see
Fig. 4.1). Then, secure SolMate® to the stand base
using two screws.
Please ensure that the cables run through the
designated holder and then pass outside the stand
base.
Wall-Mounted Installation
SolMate® can be mounted on your house wall by
simply hanging the storage unit onto the upper
mounting bracket. The wall bracket is secured with
two long, sturdy screws, each of which should be
able to support at least 30 kg of weight.*
1.
3.
4.
2.
3.1
4.1
*Screws not included in the delivery.