6
• Do not disassemble the device or its cover, or pierce it with sharp objects, as it contains live
components.
• Do not use the product near heat sources such as open flames or heating devices.
• Keep the product away from environments with strong static electricity or magnetic
fields.
• Avoid using wires or other metal objects that could cause a short circuit.
• Use only original components or accessories. For replacement components or accessories, visit
EET's official channels.
• Observe the ambient temperature specified in this manual. Excessively high temperatures
cause fire or explosion, while very low temperatures can reduce performance or cause
malfunctions.
• Do not place heavy objects on the device.
• Avoid impacts, falls, and strong vibrations. In case of severe impacts, turn off the device
immediately and stop using it. Secure the product well during transport to prevent vibrations
and shocks.
• If the product falls into water, place it in a safe, open area, allow it to dry completely, and
do not use it again. Dispose of the dried product properly.
• Clean dirt from the product’s connectors with a dry cloth.
• Place the device on a level surface to prevent damage from tipping over. If the product tips over
and sustains significant damage, turn it off immediately, place the battery in an open area away
from flammable materials and people, and dispose of it according to local regulations.
• Keep the product out of reach of children and pets.
• Store the product in a well-ventilated area.
• Do not use this product to power life-critical medical devices such as CPAP machines or
ECMO ventilators. When powering general medical devices, monitor power consumption and
ensure sufficient power is available.
• Power supply devices generate electromagnetic fields that may interfere with medical implants.
• Always disconnect the device from the power grid before performing maintenance or
cleaning.
• Do not use the product if it shows visible damage, such as cracks or broken parts.
• Avoid covering the product during use to prevent overheating.
• Protect the product from direct sunlight to avoid overheating and damage.
• Do not operate the device in explosive environments, such as near flammable liquids, gases, or
dust.
• Ensure no liquids enter the device’s connectors or interior.
• Keep the device clean and free of dust and dirt to ensure proper functionality.
• Store the device in its original packaging when not in use for extended periods to protect it
from dust and moisture (see “CARE AND MAINTENANCE” on p.8).
Consult the manufacturer of medical devices regarding restrictions and ensure a sufficient safety
distance is maintained.
• Protect the product from liquids. Do not submerge it in water and keep it dry.
To Next Page
Loading...