7
• Use the product only in well-ventilated areas to prevent overheating.
• Regularly check connections and cables for wear or damage and replace them if necessary.
• Ensure all plugs are securely seated in the sockets to avoid loose connections.
• Do not use extension cords that are not rated for the power consumption of the device.
• Avoid storing the device in extremely cold or hot environments to prevent damage to internal
components.
• Turn off the device when not in use to save energy and extend its lifespan (see “CARE AND
MAINTENANCE” on p.8).
• Allow the device to cool down after use before cleaning or storing it.
• Avoid using or charging the device during thunderstorms to minimize the risk of electric shock.
• Read and follow all instructions and warnings in the user manual to ensure safe and effective
use of the product.
• Immediately turn off the device and disconnect it from the power supply if unusual noises,
smells, or smoke occur.
• Do not operate the device in high-humidity environments, such as bathrooms or saunas, to
avoid electrical short circuits.
As with any other electrical device, ensure that individuals (including children) with limited
physical, sensory, or mental capabilities, or those lacking experience, do not suffer harm by
handling cables, plugs, or the device itself. Keep this group of people away from the photovoltaic
system or supervise them adequately to prevent accidents.
Under no circumstances should you tamper with or modify the device. There are no internal parts
requiring maintenance. Disconnect all cables (AC and DC) before moving the device. Ensure cables
are routed safely to prevent damage and avoid tripping hazards.
In the event of a fire, use a CO extinguisher or a sufficient amount of sand to extinguish it.
To Next Page
Loading...