EFD MINAC 50/80 - User Manual

MINAC Systems
Mobile Induction Heating Equipment
USER MANUAL
MINAC 25/40, 50/80
MINAC 25 Twin
Version MCCC 2.2.1
Manufacturer: EFD Induction a.s
P.O. Box 363, N-3701 Skien, Norway
Tel: +47 35506000 Fax: +47 35506010
© No part of this publication may be reproduced in any form without the
express written permission of EFD Induction a.s. EFD Induction a.s
reserves the right to change technical specifications without notice.

Summary

INTRODUCTION

SAFETY INSTRUCTIONS, PRECAUTIONS AND HAZARDS

General Safety

General safety instructions divided into warnings and cautions.

Electric Shocks

Hazards and precautions related to electrical shocks.

Heated Objects

Hazards and precautions related to heated objects causing burns or fire.

Electromagnetic Fields

Health risks associated with electromagnetic fields produced by the equipment.

RESTRICTIONS IN USE

CONNECTING AND USING THE COIL

MAN-MACHINE INTERFACE

Display and Keyboard

Description of the MMI display and keyboard layout and functions.

Operating Switches and Indicators

Overview of the operating switches and indicator lamps on the MMI.

Footer Messages

Explains the footer messages for alarms, indications, and operational status.

Menu Navigation and Functions

Introduction to the Main Menu and key sub-menus for system configuration and operation.

OPERATION

Before Starting

Preparatory steps and safety checks before operating the unit.

Start Procedure

Steps for powering on the MINAC system, including main switch and MMI programming.

Normal Operation

Guidelines for operating the MINAC system, including information, control functions, and output power.

Stop and Emergency Procedures

Procedures for normal stopping, emergency stopping, and restarting the unit.

Troubleshooting and Corrective Measures

Guide for identifying and resolving operational failures and alarms.

EFD MINAC 50/80 Specifications

General

Weight	0.5 kg
Power Supply	230 VAC, 50Hz
Power Consumption	50W
Temperature Range	0°C to +80°C
Material	Aluminum