8
5
6
• Push in the black, male quick-connect from the
EFD adapter assembly provided into the front of
the Ultra 870.
• Twist clockwise to lock.
• See page 15 for Initial Test Procedures.
Connect Air Output
• Attach an EFD syringe barrel filled with your fluid
to the adapter assembly.
• Snap the safety clip on the adapter hose closed to
prevent dripping. Remember to unsnap the clip
when ready to dispense.
• Replace tip cap with an EFD precision dispense tip.
• Place syringe barrel in the barrel holder.
4
• Connect the foot pedal to the back of the Ultra 870.
Push the white tubing into the white fitting; push the
black tubing into the black fitting.
Connect Foot Pedal
Getting
Started
Attach Syringe Barrel / Dispense Tip
To Next Page
