Need help?Do you have a question about the EFD Ultra 1400 and is the answer not in the manual?
Instructions to avoid fire or explosion, including handling flammable materials and static sparking.
Procedures for shutting down, disconnecting power, and correcting malfunctions.
Provides instructions to prevent injury during operation, including electrical shock and physical hazards.
Procedures for connecting the air input hose to the dispenser and plant air supply.
Steps for attaching a fluid-filled barrel, securing the safety clip, and attaching a dispense tip.
Instructions for unlocking, adjusting, and locking the air pressure regulator knob.
Details the pin functions for initiating cycles and end-of-cycle feedback signals.
Attaching the syringe barrel, ensuring vacuum is off, and replacing the tip cap.
Setting dispense time and testing deposit size by activating the dispense cycle.
Purging the dispense tip and setting initial air pressure for controlled fluid dispensing.
Establishing deposit size by foot pedal input and saving the setting.
Troubleshooting steps for lack of power, including checking wall receptacle and fuse.
Common causes and corrections for inconsistent deposit sizes, such as clogging or air bubbles.
Guidance on checking if the unit is in Steady mode, as the timer is reliable.
Methods to prevent fluid being drawn back, including piston use and filter traps.
To Next Page
General
