Efento SP. J.
Ul.Krupnicza 14/5
31-123 Kraków
Configuration
Configuration with Efento Cloud
Efento Cloud is a platform that receives and stores all the data collected by the loggers. On Efento
Cloud you can preview all the measurements, export them as a PDF or CSV report and set up
notifications. The key functions of Efento Cloud platform are:
● Displaying the data – measurements from loggers can be visualized in the form of a chart or
table, just click on one of the devices in “Dashboard”. The chart range can be modified by
dragging the cursor vertically and horizontally.
● Generating reports – To generate a report you can either click on one of the loggers, then
“Reports”, select the time interval and entry, then choose to export it as a PDF or CSV, or go to
section “Reports” section and do the same thing. In this section, you can also configure
automatic reports, which will be sent to specified email addresses at the scheduled time (e.g.
every month, every day).
● Rules / notifications – Efento Cloud can send SMS / email notification if the measured values
are out of the safe range. Rules can be created in the “Rules” section. To create a rule, you need
to choose one of the physical values, add recipients by typing their emails or phone numbers,
and select for which loggers this rule will be active. There is also a possibility to delay the alarm
● Alarms – if any of the rules are violated, the alarm will be triggered and saved in the platform. All
the historical alarms are visible in the “Alarms” section.
● User management – In the “Users” section you can invite users to your organization, remove
them or change their roles and permissions.
This is only a short list of key functions of Efento Cloud platform. For more information about the
platform and full configuration manual please refer to Efento Cloud User Manual.
Configuration of Efento NB-IoT loggers is done with Efento mobile application for Android devices that
can be downloaded from Google Play.
1. Set up a new account on cloud.efento.io and create a new organization. If you already have an
account skip this step.
2. Download and install Efento mobile application for Android on your device. When the application
launches for the first time, the user is asked to decide how the application will be used - to
communicate with Efento Cloud or with nearby devices. Select Efento Cloud and log in to your
Efento Cloud account.
3. Tap on the main menu icon (three lines in the upper left corner) and select “Organisation
settings” -> “Add loggers”. Follow the instructions on the screen to configure the logger and add
it to your Organization.
To Next Page
Loading...