WE RECOMMEND THAT YOUR ELECTRICITY MONITOR IS INSTALLED BY A QUALIFIED ELECTRICIAN
CONTENTS INTRODUCTION
INTRODUCTION
SAFETY
IN THE BOX
HARDWARE INSTALLATION
Prior to Installation
Mounting Individual or Multiple Circuits
Installing the Mini CT Sensor
SETTINGS
Your ecotouch Monitor
Voltage and Carbon Ratio
Tariffs
Alarm, Time and Date
Temperature and Currency
Control
Master Reset and Link
MONITOR MODES
How to Change Modes
FAQS
TECHNICAL INFORMATION
INSTALLATION NOTES
The ecotouch energy management system wirelessly measures the amount of energy that
you are using in your home and displays the data in simple, easy to understand information.
The ecotouch enables you to view your energy data in different modes, with options for
viewing historical, current or summarized data. The ecotouch not only acts as a display but
a control point, where you can turn appliances on and off through the ecosockets.
Ask George
If you have any questions about using your installation or further information on saving
energy, you can contact George or visit our website. We aim to answer all your emails within
48 hours.
Email your questions to:
info.aus@efergy.com
Email your technical questions to:
askgeorge@efergy.com
Efergy Customer Service:
(+61) 1300 799 851
www.efergy.net.au
2
3
5
6
7
9
11
12
13
14
15
16
17
18
20
21
22
2
To Next Page
Loading...