EFFEKTIV TRIUMPHATOR 2000X - Stitch Types; Triple Cover Stitch; Balancing the thread tension


Thread guide plate A
5. Continue threading according to
steps (5)-(9).
6. Pull the looper release handle. The
looper will tilt to the right for easy
access when threading.
(B) Looper release handle
7. Insert the thread into the eye of the
looper thread guide, and then into
the eye of the looper itself. Pull the
ends of the threads 10 cm back.
NOTE:
You may use a pair of tweezers.
STITCH TYPES
Triple Cover Stitch
The triple cover stitch is sewn with all three needles. This stitch forms three
parallel rows of the straight stitch on the right side, ideal for hemming,
attaching elastics, decorative stitches etc.

Left needle

Center needle

Right needle
NOTE: The machine is installed with the
EL X 705 CF needles.
Balancing the thread tension
1. Set the tension dials as follows:

Left needle thread tension dial: 4

Center needle thread tension
dial: 4

Right needle thread tension dial:
4

Looper thread tension dial: 4
2. Check the tension balance by test
stitching on the same fabric and
threads as actual garment.
Adjust the tension as necessary.
Type of Fabric Needle
Size
Type of
Thread
Light to
medium
weight
Fine
knits
Fine
jersey
80/12
or
90/14
#60-90
Spun
Heavy
Weight
Jersey
Fleece
90/14
#60
Spun
TRIUMPHATOR 2000X
2120
EN
USER MANUAL