Effigis CPAT FLEX ARD4 - ITX2 Speci Cations

4342
efgis.com
CPAT FLEX User Manual (ARD4) CPAT FLEX User Manual (ARD4)
8.5 ITX2 Specications
TECHNICAL Details
Transmitter type DBPSK
Frequency range 6.78 MHz or 27.12 MHz, set at factory
Bandwidth 30 KHz
Radiated power Maximum: -8 dBm
Antenna connector BNC 50 Ω
Transmitted data 68 bits
Transmission duration 8 ms
Transmission interval 100 ms
Communication port USB type A
ELECTRICAL Details
Power
Inputs: +12 VDC 1.2 A max
+7.2 VDC lithium ion battery pack of 2000 mAh ~ 0.3 A
AC battery charger
Input: 100-240 V ~ 50-60 Hz 0.7 A
Output: +12 VDC 1.66 A
Transient overvoltage II
Rated pollution degree 2
Mains supply voltage
uctuations
Up to ±10% of the nominal voltage
Operation time 6 hours nominal on battery power
Operating temperature -20˚ to +40˚ C / -4˚ to +104˚ F
Storage temperature -20˚ to +45˚ C / -4˚ to +113˚ F
Recommended use
Indoor use or outdoor use without exposing to direct sunshine or
wet location
Altitude Up to 2,000 m (6,560 ft)
Maximum relative
humidity
80% for temperatures up to 31˚ C (88˚ F) decreasing linearly to 50%
relative humidity at 40˚ C (104˚ F)
PHYSICAL Details
Dimensions [H x W x D] 19.5 cm x 8.6 cm x 4.5 cm / 7.7” x 3.4” x 1.8”
Weight 550 g / 19 oz
* Specications subject to change without prior notice.