5
TO START THE FIERY PROSERVER
1 Set the power switch on the back of the Fiery proServer to the On (|) position.
FIGURE 1: Fiery proServer power switch
2 Power on the Fiery proServer.
Press once and release the button to power on the system. The power supply automatically
senses the correct voltage.
FIGURE 2: Fiery proServer power button
3 At the Admin logon on the monitor, enter Fiery.1 in the password field, and then press
<Enter>.
Ty pe Fiery.1 exactly. The password is case-sensitive; for example, fiery.1 will not work.
To Next Page
Loading...
