6
4 Allow startup to proceed until the Fiery proServer desktop appears on the monitor, and the
Fiery XF commands appear on the control panel located on the top front of the Fiery
proServer.
The Fiery proServer takes approximately two minutes to start up.
By default, the Windows taskbar is hidden. The taskbar contains:
•
Fiery XF Control, a tool for controlling the Fiery XF server
•
Fiery OS Tools, a tool for changing the language of the operating system and
keyboard, Fiery XF Control, and Fiery XF
5 To display the Windows taskbar, do one of the following:
• To display the taskbar, move the pointer to the bottom of the screen.
• To display the taskbar at all times, right-click the taskbar and then click Properties. In the
Properties dialog box, click the Taskbar tab. Under “Taskbar appearance”, select “Lock the
taskbar” and clear “Auto-hide the taskbar”. Click OK to close the dialog box.
The Fiery XF Control icon is not immediately visible in the status area of the taskbar. Click
the up arrow to show hidden icons, and then drag the Fiery XF Control icon from the hidden
icon area to the status area.
Fiery XF
Fiery XF is a fast, high-performance raster image processor (RIP) that boosts color quality and
productivity for your printer.
Starting Fiery XF
Fiery XF starts automatically whenever you start the Fiery proServer. If you exit Fiery XF for
any reason, you can restart the program as follows:
TO START FIERY XF
1 Do one of the following:
• Double-click the Fiery XF client icon on the desktop.
FIGURE 3: Fiery XF client icon
• Right-click Fiery XF Control, and click Fiery XF Client Start.
• Press the line selection button for the “XF Client Start” command on the Fiery proServer
control panel.
To Next Page
Loading...
Need help?
General
