CONNECTING TO THE NETWORK
14
• The Fiery X3eTY2 has a remote printer name you must use in order to communicate with it
successfully.
Regardless of the UNIX system you use, the name you use for the remote printer (or rp in the
/etc/printcap file) in configuring the network for the Fiery X3eTY2 must be one of the
following:
print
hold
Workstations on a TCP/IP network can print directly to the Fiery X3eTY2 as a remote
printer, or can print to a Windows 2000/Server 2003 server or UNIX workstation acting as a
print server.
To Next Page
Loading...
Need help?
General
