SETTING UP THE FIERY X3ETY2 FROM THE COPIER TOUCH PANEL
27
Server Setup options
The Server Setup menu lets you specify system information that pertains to the Fiery X3eTY2
and all users. To access the menu, follow the instructions on page 25.
When you choose Server Setup, the options appear in sequence, as follows. Default values,
where applicable, appear in square brackets. Words shown in italics indicate that a product- or
site-specific value is displayed.
Server Name
Default server name
Enter a name for the Fiery X3eTY2 (up to 15 characters long). This is the name by which the
Fiery X3eTY2 appears on the network.
NOTE: Do not use the device name (65C-KM) as the server name. If you have more than one
Fiery X3eTY2, do not assign them the same name.
System Date
Date
Confirm the correct system date in the standard format for your use. The date appears on the
Job Log.
NOTE: The Fiery X3eTY2 uses the current date and time as configured on the copier.
System Time
Time
Confirm the correct system time. The time appears on the Job Log.
Enable Remote Desktop
Enable/Disable [Enable]
Select Enable to enable Remote Desktop, a Microsoft application that allows remote
computers to manage and control the Windows desktop features of the Fiery X3eTY2. For
information about enabling Remote Desktop on a computer, see page 39.
To Next Page
Loading...
Need help?
General
