4. Installation
11
4.3 Connection to the EFOY Pro
1. Screw the fuel-cartridge connector of the EFOY Pro on the
DuoCartSwitch.
2. Connect one DuoCartSwitch via a Port Doubler to each
RJ45-plugs of the EFOY Pro:
- Remote Control
- Data Interface
WARNING!
Only connect one DuoCartSwitch to each RJ45-plug (Remote
Control / Data Interface). If both DuoCartSwitch are connected
to one RJ45-plug the switching of the DuoCartSwitch fuel
connectors malfunctions, which might damage the EFOY Pro
fuel cell.
3. Activate the DuoCartSwitch (see Chapter 5.1, page 12).
To Next Page
Loading...
General