18
1
2
3
Operator’s Manual Park Ranger 2150 Hedge cutter
3.1 Cleaning
Daily cleaning and maintenance will extend the
lifetime of both the machine and the attachment.
Clean the Hedge cutter with water after use.
Avoid high-pressure cleaning of the snap
couplings.
Wipe snap couplings clean with a cloth.
(Picture 1)
3.2 Maintenance
Check all the bolts and tighten if required after a
few hours of operation, and once every season
thereafter.
Lubricate blades and blade holders every two
hours. (Picture 2)
Lubricating nipples on all moveable parts must be
re-lled at least once every season. (Picture 3)
Defective blades must be replaced immediately.
This ensures effective trimming and reduces
wear and tear on the Hedge cutter.
Blade replacement must only be carried out by
an authorised Egholm dealer
Cleaning the couplings
Lubricating blade
Lubricating nipples
Service and Maintenance
To Next Page
Loading...