Egholm 2150 - Technical Data

7
1
2
Operator’s Manual Park Ranger 2150 Hedge cutter Operator’s Manual Park Ranger 2150 Hedge cutter
1.3 Technical data
Dimensions Attached Storage dimensions
Length (L)..............................3,500 mm.................. 1,000 mm
Width (W) ..............................1,600 mm.................. 1,600 mm
Height (H) incl. cab......................1,960 mm.................. 1,450 mm
Height (H) incl. roll bar...................2,000 mm
Technical data
TypeHP ................................................. TRIM2150/ MB130-3
Max. horizontal reach ..............................................2,500 mm
Cutting width...................................................... 1,300 mm
Horizontal cutting height ....................................... 300-2,100 mm
Vertical cutting height ............................................ 0-3,200 mm
Angle for cutting bar ....................................................270º
Max. branch thickness ................................................20 mm
Operating speed .................................................... 1-3 km/h
Weight................................................................130 kg
Hydraulic oil ................................Texaco Rando HDZ 68 or equivalent
NB
Specications may be changed without prior notice.
Information plate
(Picture 1+2)
General information
Type plate
Cutter
Type plate
Arm