EGi MILLENIUM - Pre-amplified XLR Microphone Base 1105; 1105 XLR Microphone Socket; 1105 Microphone Type Selector; 1105 Power Indicator Lamp

To Next Page

To Previous Page

42.

1107

1105

1105Pre-amplied XLR microphone base

1 Professional XLR balanced microphone socket

2 Microphone type selector

This switch enables the user to select which type of microphone will be connected to the XLR socket: dynamic, electret

without power supply or electret with phantom power supply of 12 Vdc.

3 Pilot lamp ON

Stays on while you have power, whether the microphone is connected or not.

1107Volume regulator for mic base 1105

1 Push button ON/OFF

One press turns on and the next press turns off the pre-ampliﬁer for the microphone base 1105.

2 On lamp

Indicates that the pre-ampliﬁer is on.

3 Volume regulator

To turn up

or down the volume level of the microphone signal.

4 Pilot lamp for volume regulation

It blinks when the volume level of the microphone reaches its maximum.

NOTE: This sound unit has an activation PIN for MILLENNIUM series ampliﬁers, through a DC voltage at the

speaker strip output “OUT+”.

MIC