28 56-VOLT LITHIUM-ION ELECTRIC LAWN TRACTOR — TR4200E
◾
Slightly depress the accelerator pedal and then release it. The tractor and the CCS function will stop.
◾
Press the CCS button. The tractor and the CCS function will stop.
NOTE:
When the CCS is stopped, the “ ” icon will disappear from the LCD screen and beep will sound twice.
NOTE:
If the parking-brake pedal is depressed, the tractor will stop but the “ ” icon will blink on the LCD screen to indicate the CCS is on
standby. In this case, release the parking-brake pedal, press the CCS button. The tractor will resume driving automatically and the “
” icon will
stop blinking.
TURNING BLADES ON WHILE DRIVING IN REVERSE
NOTICE: Mowing in reverse is not recommended.
WARNING: Use extreme caution when mowing in reverse. Always make sure no individuals come into the work area, especially small children
before and while mowing in reverse.
WARNING: The visibility of the operators could be impaired when operating the tractor attached with the bagger kit. Extreme caution and
familiarity with the surroundings should always be taken into consideration before and while mowing in reverse.
To Activate (Enter) MOWING IN REVERSE (E23)
To Stop (Exit) MOWING IN REVERSE, you may choose one of the four ways:
◾
Press the MOWING IN REVERSE button once.
◾
Raise yourself off the tractor seat.
◾
Press the start/stop button for 3s to turn off the LCD screen.
◾
Remove the safety key or remove the battery pack(s) to shut down the tractor.
NOTE: When the MOWING IN REVERSE is stopped, the “
” icon will illuminate on the LCD screen.
To Next Page
Loading...
